 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Flex36
(Up to 16,000 lb. capacity)
Stellar Hooklift System
Stellar Flex36 - Up to 16,000 capacity
No other hooklift manufacturer currently offers the flexability of the Flex36. The Flex36 can handle dump containers ranging from 8’ to 15’ and flatbeds ranging from 10’ to 16’ and has a lifting capacity of up to 16,000-pounds. It has a maximum dump angle of 50 degrees to 54 degrees, depending on the length of body.
- Standard in-cab manual controls which allow for precise metering of the manual hydraulic valve.
- Patented dump/load interface
- Hydraulic locks to prevent cylinder movement in case of pressure loss
- Mechanical rear body tie-down latches
- Resettable dump/tilt tabs
- Hydraulic rotary valve to prevent front tilt movement when the dump frame is raised
- Full length dump frame with front saddles to support the body during the dump mode
- DX pre-lubricated greasable bushings used at pivot points
- Grease zerks at all pin points to allow purging of contaminates
- Greaseable load rollers
- Carbon steel and zinc plated pins standard
- Two-part polyurethane enamel
| - - A B C D E G H I J K L |
Item Description |
60-8 |
| - - A B C D E G H I J K L |
Item Description Liftting/Dumping Cap. Dump Angle Lowest Hook Height Effective Length Truck Frame Height Hooklift Height Hooklift Length Center of Gravity Chassis Cab to Axle Max. Height Loading Longest Body to Dump Max. Height Dumping Shipping Weight Hook Height Shipping (LxHxW) Min. Truck GVWR Load Angle Body Lengths* Body Lengths** |
84-10 Up to 16,000 (7,257 Kg) 53° 25" (635 mm) 115" (2,921 mm) 36" (914 mm) 41.5" (1,054 mm) 126" (3,200 mm) 58" (1,473 mm) 84" to 96" (2,134 to 2,438 mm) 118" (2,997 mm) 144" (3,658 mm) 162" (4,115 mm) 1,360 (617 Kg) 35.63" (905 mm) 126" x 49" x 47" 10,500 to 26,000 (4,763 to 11,793 Kg) 35° 10' to 12' (3.0 to 3.7 m) To 13' (4.0 m) |
| - - A B C D E G H I J K L |
Item Description Liftting/Dumping Cap. Dump Angle Lowest Hook Height Effective Length Truck Frame Height Hooklift Height Hooklift Length Center of Gravity Chassis Cab to Axle Max. Height Loading Longest Body to Dump Max. Height Dumping Shipping Weight Hook Height Shipping (LxHxW) Min. Truck GVWR Load Angle Body Lengths* Body Lengths** |
108-12 Up to 16,000 (7,257 Kg) 54° 27" (686 mm) 142" (3607 mm) 36" (914 mm) 41.5" (1,054 mm) 154" (3,912 mm) 68" (1,727 mm) 108" to 120" (2,743 to 3,048 mm) 135" (3,429 mm) 180" (4,572 mm) 185" (4,699 mm) 1,615 (733 Kg) 35.63" (905 mm) 154" x 49" x 47" 10,500 to 26,000 (4,763 to 11,793 Kg) 36° 12' to 14' (3.7 to 4.3 m) To 15' (4.6 m) |
| - - A B C D E G H I J K L |
Item Description Liftting/Dumping Cap. Dump Angle Lowest Hook Height Effective Length Truck Frame Height Hooklift Height Hooklift Length Center of Gravity Chassis Cab to Axle Max. Height Loading Longest Body to Dump Max. Height Dumping Shipping Weight Hook Height Shipping (LxHxW) Min. Truck GVWR Load Angle Body Lengths* Body Lengths** |
120-14 Up to 16,000 (7,257 Kg) 50° 28" (711 mm) 151" (3,835 mm) 36" (914 mm) 41.5" (1,054 mm) 161" (4,089 mm) 70" (1,778 mm) 120" to 130" (3,048 to 3,302 mm) 136" (3,454 mm) 192" (4,877 mm) 187" (4,750 mm) 1,650 (733 Kg) 35.63" (905 mm) 161" x 49" x 47" 10,500 to 26,000 (4,763 to 11,793 Kg) 32° 13' to 15' (4.0 to 4.6 m) To 16 (4.9 m) |
*Recommended container/dump body length
Assumes 3ft. overhang from center of rear roller pin
(Bumper typically 12" from center of roller pin)
**Longest recommended flatbed length
Assumes 5ft. overhang from center of rear roller pin
(May require bumper and latch options)
Note: Capacity is rated with water level load including weight of body.
RELATED LINKS
